Open Front Industrial Brush Cutter

Click Here To Watch It In Action!

Open Front Industrial Brush Cutter

The Standard Flow X4 Open Front Brush Cutter is our best selling skid steer brush cutter because of the fact that it delivers high flow performance on standard flow machines.

X4 - Open Front Industrial Brush Cutter

Family of Brush Cutters Video

Brush Cutter Catalog

Open Front Industrial Brush Cutter

The Skid Pro Difference

8” Cutting Capacity

Amazing 8″ cutting capacity

Open Design

Open design allows for quicker, easier cutting of bigger trees and saplings

HD Front Push Bar

HD front push bar helps to push and then cut bigger trees and saplings

4 Cutting Blades

Massive 467 lbs. flywheel with 4 bi-directional blades for maximum cutting performance on brush & grass

Super Powerful

Super powerful, direct drive motor delivers high torque & ultra fast blade tip speed

Reinforced Decking

Steel gusseting runs across both the width and length of the unit to provide ruggedness and longevity in any use environment

Wire Protection

Wire protection kit between deck and blade carrier comes standard to help prevent fence wire and debris from causing downtime

Faster Cutting

Provides a faster, cleaner cut on both grass and brush than was ever possible on a standard flow mower


Industrial Design
Operator Ease

Product Resources

Standard Flow Open Front

Parts Breakdown
Owner Manual
2 year warranty


Open X472”84”
Cutting Width72”84”
Overall Width78”89”
Deck Height10”10”
Min Cut Height2”2”
Cutting Capacity8”8”
Flow Rate15-25 gpm15-25 gpm
Weight1,592 lbs.2,100 lbs.
Skid Steer Door Glass

Recommended - 1/2" Polycarbonate Windshield

We highly recommended a 1/2" polycarbonate door windshield or more for this product. Click here to learn more.



    Paul B


    Last week, I worked my new 72” Industrial Brush Cutter for about 4 hours, clearing overgrowth on our 3/8th mile private road. It met all of my hopes and expectations for performance. It tackled 4” and greater growth including holly bushes, which is really a hard wood. The unit is very well balanced, as it runs as smooth as glass when revved up to top RPM. My Case 1845C rated at 16 gpm handled the 72” Industrial Brush Cutter very well. I hit a few rocks. The blades held up well. The quality of the steel in the blades is, apparently, very good. I should also add that the fit and finish of the brush cutter is very nice. I love the powder coated finish. You may quote me on this. Best cutter ever.

      Chuck G
      Chuck G


      Josh, just received a promo e mail from you and it reminded me that I had intended to give you some feedback on your 72" industrial brush cutter that we purchased. We have used it extensively this past summer and fall in heavy willow thickets along creek bottoms, grass and very tough soap weed (Yucca). The cutter is exactly as advertised and the only wear evidence is brush marks on the sides of the cutter. We use a Bobcat S630 at 6500' elevation which handles it with ease. We are very pleased with the cutter, I call it a masticator/cutter, and I am very pleased with your service at Skid Pro. Thank You!

        Steve N
        Steve N


        I have in the past used a bobcat 72" brush cutter on the TL 140 standard flow machine ( 19 gpm) that I am using to power your 72" industrial rotary cutter. I would say that your machine out preforms the bobcat 3 to 1. I have cut about 2 acres of very dense (too thick to walk thru) swamp brush most of which stands 8' tall and consists of 2" to 6" diameter soft woody plants. This is much heavier brush than anything you show in your videos. I have also cut about 3 acres of grassy fields, a walking trail thru a thick cedar and spruce forest and a hardwood forest. This machine has cut thru cedar trees 6 to 8" thick by taking my time to cut through the trunk to fell the tree and then chopping the trunk and branches to pieces. By taking my time to allow the machine to cut, the work it can do is absolutely beyond compare to the bobcat design. The direct drive hydraulic motor, heavy fly wheel and 4 blades are no doubt the secret to this machines performance. The two way motor is very convenient to unjam any obstruction and never leave your seat. The pressure relief valve keeps me in check not to over abuse the cutter. I would recommend this product to anyone with a standard flow machine.

          Tim H
          Tim H


          I took delivery of my new X4 Open Front brush cutter and put it to the test yesterday. I am running it on my 2020 John Deere 325G. As a background, I have a 300 acre timber farm in south Alabama. Many planted pines (crop) and scattered hardwoods. The climate here is warm and plenty of rain, so underbrush is a big problem. On the test run, the X4 performed fantastic! I have historically used a Deere MX6 cutter on my tractor, but cutting this stuff was tedious and tough on the tractor having to push through the heavy brush. I’m very familiar with my 325G, so the “learning curve” with the X4 was pretty easy. It literally devours everything in its path very smoothly….the videos do not lie! A couple of neighboring property owners were looking at it and were amazed at the heavy construction. It came on the pallet ready to hook up and run. My rep, Troy, was very helpful and answered all questions. Great experience so far!

          Commonly Asked Questions


          Check Out Our Price List

          "*" indicates required fields

          This field is for validation purposes and should be left unchanged.

          SKID PRO

          24-hour Customer Service

          Our Product Gurus are available 24/7 to provide any information & assistance you may need.