Best Skid Steer Brush Cutters in 2026: 5 Skid Pro Models Compared

The right skid steer brush cutter comes down to two things: how much hydraulic flow your loader delivers, and what you’re cutting. Skid Pro builds five brush cutters, from a 36″ mini unit to an 84″ high-flow open-front cutter. Here’s how they compare, using the specs Skid Pro publishes for each model.

TL;DR

• Best all-round (standard flow): HD3 Brush Cutter, 72″, 15–25 GPM
• Best for heavy brush on standard flow: Open Front Industrial Brush Cutter (X4), 8″ cutting capacity
• Best for high-flow loaders: Industrial Brush Cutter High Flow Open Front, 25–60 GPM, 10″ capacity
• Best for grass and pasture: GB2 Brush Mower, 60″ or 72″ closed deck
• Best for mini skid steers: Mini Skid Steer Brush Cutter, 36″/48″, 10–15 GPM

How to choose

• Match the flow first. Your loader’s auxiliary GPM must fall inside the cutter’s listed range.
• Open front vs closed deck. Open-front cutters feed standing brush and saplings into the blades. A closed deck suits grass, weeds and pasture finishing.
• Width and weight. Wider decks clear more per pass but weigh more. Check the cutter’s weight against your loader’s rated operating capacity.

At a glance

• HD3 Brush Cutter: 72″ cutting width, 15–25 GPM, 4″ cutting capacity, 1,330 lbs
• Open Front Industrial (X4): 72″ / 84″, 15–25 GPM, 8″ cutting capacity, 1,770 / 2,120 lbs
• Industrial High Flow Open Front: 72″ / 84″, 25–60 GPM, 10″ cutting capacity, 1,780 / 2,130 lbs
• GB2 Brush Mower: 60″ / 72″ closed deck, 15–25 GPM, 3″ cutting capacity, 760 / 900 lbs
• Mini Skid Steer Brush Cutter: 36″ / 48″, 10–15 GPM, 4″ cutting capacity, 580 / 745 lbs

1. HD3 Brush Cutter: best all-round standard-flow cutter

The HD3 is a 72″ cutter built for standard-flow skid steers running 15–25 GPM, and it weighs 1,330 lbs. It’s the default pick for fence lines, overgrown lots and general brush on most full-size machines.

Best for: owners running standard flow who want one cutter for most jobs. Details: https://skidpro.com/product/skid-steer-hd3-brush-cutter/

2. Open Front Industrial Brush Cutter (X4): best for heavy brush on standard flow

The X4 comes in 72″ and 84″ cutting widths (78″ / 89″ overall) with a 10″ deck height and an 8″ cutting capacity. It runs on 15–25 GPM and weighs 1,770 or 2,120 lbs.

Best for: clearing saplings and thick brush without a high-flow loader. Details: https://skidpro.com/product/skid-steer-open-front-industrial-brush-cutter/

3. Industrial Brush Cutter High Flow Open Front: best for high-flow loaders

The high-flow version keeps the 72″ / 84″ widths (77″ / 89″ overall) and 10″ deck height, and raises cutting capacity to 10″. It’s rated for 25–60 GPM and weighs 1,780 or 2,130 lbs.

Best for: high-flow machines doing regular land clearing. Details: https://skidpro.com/product/skid-steer-industrial-brush-cutter-high-flow-open-front/

4. GB2 Brush Mower: best for grass, weeds and pasture

The GB2 is a closed-deck mower in 60″ and 72″ sizes (760 and 900 lbs) with a 3″ cutting capacity and 15–25 GPM flow. A closed deck is the better choice when the job is mowing grass and light brush, not felling saplings.

Best for: pasture, ditches and property maintenance. Details: https://skidpro.com/product/skid-steer-gb2-brush-mower/

5. Mini Skid Steer Brush Cutter: best for mini skid steers

Built for mini loaders, it comes in 36″ and 48″ widths with 10–15 GPM flow and a 4″ cutting capacity. It weighs 580 or 745 lbs.

Best for: tight trails, yards and compact equipment. Details: https://skidpro.com/product/mini-skid-steer-brush-cutter/

Which should you choose?

Start with your loader’s flow. On standard flow, choose the HD3 for general work or the X4 for heavier brush. On high flow, the Industrial High Flow Open Front gives you the most cutting capacity. For grass and pasture, choose the GB2. For mini skid steers, choose the Mini Brush Cutter. If you’re unsure, call a Skid Pro Product Guru to confirm fit before you order.

FAQ

What GPM do I need for a skid steer brush cutter? It depends on the model: 10–15 GPM for the Mini, 15–25 GPM for the HD3, X4 and GB2, and 25–60 GPM for the Industrial High Flow Open Front.

What’s the difference between open-front and closed-deck cutters? Open-front cutters (X4, High Flow Open Front) let standing brush and saplings feed into the blades. A closed deck like the GB2 suits grass and lighter growth.

How thick a sapling can a Skid Pro cutter handle? Skid Pro lists 8″ cutting capacity for the X4, 10″ for the High Flow Open Front, 4″ for the HD3 and Mini, and 3″ for the GB2.

Will it fit my skid steer? Confirm your loader’s mount, auxiliary flow and rated operating capacity against the cutter’s spec table, or call Skid Pro before ordering.

See all Skid Pro brush cutters: https://skidpro.com/price-list/