Best Skid Steer Compactors in 2026: Skid Pro Vibratory Roller Guide
October 29, 2026
Skid Pro sells a skid steer Concrete Breaker built for demolition, slab removal and rock work. This guide covers its published specifications so you can match it to your loader’s hydraulics before you order. Confirm every figure on the product page, since specifications are updated there.
| Specification | Published value |
|---|---|
| Impact energy | 750 ft. lbs. |
| Impact rate | 550–1,400 bpm |
| Required oil flow | 12 gpm |
| Required pressure | 1,600 psi |
| Carrier weight | 7,500–13,500 lbs. |
| Operating weight | 882 lbs. |
| Hose diameter | 3/4″ |
| Tool diameter | 2.705″ |
The published flow and pressure requirements are modest, so the breaker is aimed at standard-flow skid steers inside the listed carrier weight range. Check your loader’s auxiliary flow and relief pressure against the table above, and confirm quick-attach compatibility with a Skid Pro Product Guru before ordering.
A quad-tapered moil point suits most flat work and concrete breaking where material has high penetration rates. A double-beveled chisel point suits hard, abrasive, fracturable rock or substrate with lower penetration rates. A water kit option is available.
The product page lists 12 gpm at 1,600 psi.
The product page lists a carrier weight of 7,500–13,500 lbs.
Yes, a water kit option is listed on the product page.
Call one of our Product Gurus for more information & special promotions!
