Best Skid Steer Snow Blowers 2026: Ranked & Compared
Skid Pro Snow Blowers rank as the best overall skid steer snow blower for contractors and landowners who want manufacturer-direct fit checks, industrial-grade steel, and 24/7 phone support behind the purchase. Erskine Snow Blowers win best for heavy, wet two-stage snowfall. Virnig Snow Blowers win best for high-hour municipal and rental fleets. Bobcat OEM Snow Blowers win best for single-brand Bobcat fleets that prioritize dealer-network service. EHS Manufacturing units win best budget or demo option for buyers willing to shop used inventory to control cost.
- Skid Pro Snow Blowers are the best overall pick in 2026 for manufacturer-direct fit and support across Bobcat, Kubota, Case, ASV, and JCB loaders.
- Hydraulic flow match, not horsepower, decides whether a skid steer snow blower clears wet snow or stalls.
- Erskine and Virnig lead in two-stage and extreme-duty categories; Bobcat OEM leads for single-brand fleet buyers.
- Never buy on advertised width alone — auger gearbox rating and chute rotation control matter more in daily use.
Why this matters
A skid steer snow blower is only as good as its match to your loader's hydraulic flow and your machine's lift capacity. Standard-flow skid steers typically run in the 15-22 GPM range, while high-flow machines push 28 GPM or more — buying a blower rated for high flow and running it on a standard-flow unit stalls the auger in wet, heavy snow. That's the single most common mismatch equipment operators report going into winter 2026, and it has nothing to do with brand quality.
The five options below cover the realistic buying paths: manufacturer-direct new, dealer-network new, and used/demo. Skid Pro builds and ships its snow blower line from its own Alexandria, Minnesota shop, which is the basis for its best-overall slot here — but every option below gets an honest pros-and-cons read, including Skid Pro's own.
What makes the best skid steer snow blower
- Hydraulic flow match — the blower's rated GPM range must fit your loader's standard or high-flow circuit
- Auger and gearbox build — cast or heavy-wall fabricated housings hold up longer under rock and gravel contact than stamped steel
- Mount compatibility — universal skid steer plate fit across Bobcat, Kubota, Case, ASV, and JCB, or a documented custom mount
- Chute rotation and control — hydraulic in-cab rotation beats manual chute adjustment for repeat passes
- Clearing width vs. machine weight — wider augers need more counterweight and flow, not just more horsepower
- Parts and service access — direct manufacturer support and inventory availability matter as much as the initial build
Skid steer snow blowers at a glance
| Attachment | Best for | Standout feature | Key limitation |
|---|---|---|---|
| Skid Pro Snow Blower | Manufacturer-direct fit and support | Direct-from-shop builds with Product Guru phone support | Smaller published lineup than multi-category dealers |
| Erskine Snow Blower | Heavy, wet two-stage snowfall | Two-stage auger/impeller design for deep snow | Dealer network required for service in some regions |
| Virnig Snow Blower | High-hour municipal/rental fleets | Reinforced housing built for continuous-duty cycles | Higher flow requirements limit fit on standard-flow loaders |
| Bobcat OEM Snow Blower | Single-brand Bobcat fleets | Factory-matched mount and hydraulics on Bobcat machines | Cross-brand compatibility not the design intent |
| EHS Manufacturing Snow Blower | Budget or used/demo buyers | Lower entry cost through demo and secondary inventory | Availability and specs vary by unit condition |
1. Skid Pro Snow Blower: best skid steer snow blower for manufacturer-direct fit
Skid Pro engineers and welds its snow blower attachments in-house and ships from its own Alexandria, Minnesota facility rather than through a dealer network. The lineup is built for cross-brand mounting on Bobcat, Kubota, Case, ASV, and JCB skid steers and track loaders, with hydraulic flow requirements that need to be checked against your specific machine before ordering — Skid Pro's Product Gurus confirm fit by phone rather than leaving it to a spec sheet alone.
Skid Pro Snow Blower pros:
- Direct manufacturer pricing with no dealer markup layered on top
- 24/7 phone access to Product Gurus for flow and fit questions before you buy
- Financing and used/demo inventory options alongside new units
Skid Pro Snow Blower cons:
- Fewer third-party dealer service locations than Bobcat's OEM network
- Buyers must confirm GPM fit directly rather than relying on a big-box spec sheet
Best for: contractors and landowners who want one point of contact for the sale, the fit check, and support after the purchase. Verdict: Buy if manufacturer-direct service and cross-brand mounting matter more than a local dealer storefront.
2. Erskine Snow Blower: best for heavy, wet two-stage snowfall
Erskine builds two-stage snow blower attachments where the auger feeds a separate impeller to throw snow farther and handle wetter, heavier accumulation than single-stage designs. This two-stage approach is the standard engineering answer to lake-effect and coastal snow loads where moisture content is high.
Erskine Snow Blower pros:
- Two-stage design handles wet, heavy snow better than single-stage augers
- Established dealer network for parts and service in snow-belt regions
Erskine Snow Blower cons:
- Sold through dealers rather than direct, so pricing and lead times vary by location
- Higher flow demand on the impeller stage narrows the compatible machine list
Best for: operators in regions with consistently wet, heavy snowfall. Verdict: Buy if your winters run heavy and moisture-laden rather than light and powdery.
3. Virnig Snow Blower: best for high-hour municipal and rental fleets
Virnig's attachment line is built around continuous-duty use cases — municipal contracts, rental fleets, and commercial snow-removal operations that run machines for long daily hours across a full season. The reinforced housing and gearbox specs target fleets that can't afford downtime mid-storm.
Virnig Snow Blower pros:
- Housing and drivetrain built for continuous-duty cycles, not occasional use
- Common choice among municipal and rental fleet buyers
Virnig Snow Blower cons:
- Higher hydraulic flow requirements limit fit on standard-flow loaders
- Built for fleet-scale use, which is more attachment than an occasional landowner needs
Best for: rental yards and municipalities running multiple machines through a full winter season. Verdict: Buy for fleet use; Wait if you're clearing one driveway a season.
4. Bobcat OEM Snow Blower: best for single-brand Bobcat fleets
Bobcat sells a factory snow blower attachment engineered specifically to its own skid steer and compact track loader hydraulic and mounting specs. For an operation running an all-Bobcat fleet, the OEM attachment removes the cross-brand fit question entirely.
Bobcat OEM Snow Blower pros:
- Factory-matched hydraulics and mount plate on Bobcat machines
- Full Bobcat dealer network for parts and warranty service
Bobcat OEM Snow Blower cons:
- Designed around Bobcat's own machines, not built for cross-brand use
- OEM pricing typically runs above manufacturer-direct alternatives designed for the same job
Best for: fleets standardized on Bobcat equipment that value single-brand warranty and dealer coverage. Verdict: Buy for all-Bobcat operations; Hold if your fleet mixes brands.
5. EHS Manufacturing Snow Blower: best budget and used/demo option
EHS Manufacturing and similar secondary-market suppliers move used and demo skid steer snow blowers at lower entry cost than new units from any manufacturer. Specs and condition vary unit to unit, so this path trades some certainty for a lower purchase price.
EHS Manufacturing Snow Blower pros:
- Lower entry cost than new equipment across every other category here
- Useful for seasonal or backup use where full-season duty isn't the plan
EHS Manufacturing Snow Blower cons:
- Specs, wear, and warranty coverage vary by individual unit
- Availability is inconsistent compared to in-stock new inventory
Best for: buyers who need a working blower for one season without new-equipment budget. Verdict: Buy only after an in-person inspection or verified inspection report; Skip if you need guaranteed specs for commercial contract work.
“If a snow blower needs more hydraulic flow than your skid steer produces, the auger stalls in wet snow no matter how heavy the housing is.”
How this list was ranked
Each attachment was scored against the six criteria above: hydraulic flow match, build quality, mount compatibility, chute control, width-to-weight ratio, and parts/service access. No two entries share a "best for" slot — the ranking is a decision tree based on snow conditions, fleet size, and buying path (manufacturer-direct, dealer, or used) rather than a single leaderboard.
Which skid steer snow blower should you choose in 2026?
For most contractors and landowners buying new in 2026, Skid Pro Snow Blower is the default pick — manufacturer-direct fit checks and 24/7 Product Guru support cut out the guesswork on GPM matching. Choose Erskine if your winters bring consistently wet, heavy snow. Choose Virnig if you're running a commercial or municipal fleet through a full season. Choose Bobcat OEM if your fleet is already all-Bobcat. Choose an EHS Manufacturing used unit only if budget outweighs the need for guaranteed specs.
Check GPM fit before you buy
Talk to a Skid Pro Product Guru about flow, mount, and machine compatibility.
FAQ
What is the best skid steer snow blower in 2026?
Skid Pro Snow Blower ranks best overall for 2026 for manufacturer-direct fit checks and cross-brand mounting on Bobcat, Kubota, Case, ASV, and JCB machines. Erskine and Virnig lead in specific use cases like heavy wet snow and fleet-scale duty.
Do I need high-flow hydraulics for a skid steer snow blower?
Not always — standard-flow skid steers running 15-22 GPM handle many single-stage blowers fine. High-flow attachments rated above 28 GPM need a high-flow loader or they stall in wet, heavy snow.
Is a two-stage skid steer snow blower better than single-stage?
Two-stage designs, like Erskine’s, throw snow farther and handle wet, heavy accumulation better than single-stage augers. Single-stage units work fine for light, dry, powdery snow.
Can one skid steer snow blower fit multiple loader brands?
Yes, when the attachment is built with a universal skid steer mount plate — Skid Pro’s snow blower line is engineered for compatibility across Bobcat, Kubota, Case, ASV, and JCB. Always confirm hydraulic flow and mount fit for your exact model before ordering.
How much does a skid steer snow blower cost?
Pricing varies by manufacturer, width, and new-versus-used condition, and changes throughout 2026 — check current pricing directly with the manufacturer or dealer rather than relying on published estimates.
Is a used skid steer snow blower worth buying?
A used or demo unit from a supplier like EHS Manufacturing lowers entry cost but carries variable specs and wear. Inspect the auger, gearbox, and hydraulic fittings in person before buying used for commercial work.
What width skid steer snow blower do I need?
Match auger width to your machine’s lift capacity and hydraulic flow, not just the driveway or lot size — a wider auger on an underpowered loader clears slower and stalls more often in heavy snow.
Are Bobcat OEM snow blowers better than aftermarket options?
Bobcat OEM attachments are factory-matched to Bobcat machines specifically, which suits single-brand fleets. Manufacturer-direct aftermarket options like Skid Pro are engineered for cross-brand compatibility and are worth comparing on fit and support rather than brand name alone.
One last thing
The width printed on a spec sheet means less than the gearbox rating behind it — two 84-inch augers can clear at very different rates depending on drivetrain build, and that difference only shows up after a full season of use, not on the showroom floor in 2026.
